Connecting Four Speakers; Connecting Two Speakers (Unbridged Connection) - Radio Shack XL-260 Owner's Manual

12-2017.fm Page 13 Tuesday, May 9, 2000 10:02 AM

Connecting Four Speakers

CH1 Front
Left Speaker
1. Use a screwdriver to connect the front
left speaker's positive (+) wire to the
amplifier's terminal.
CH1 (+)
2. Use a screwdriver to connect the front
left speaker's negative (–) wire to the
amplifier's terminal.
CH1 (–)
3. Repeat Steps 1–2 to connect the front
right speaker's positive (+) and negative

Connecting Two Speakers (Unbridged Connection)

If you do not have high-power speakers, use
this connection. This connection produces
65 watts per channel.
1. Use a screwdriver to connect the left
speaker's positive (+) wire to the ampli-
fier's terminal.
CH3 (+)
CH2 Front CH3 Rear
Right Speaker
Left Speaker
4. Repeat Steps 1–3 to connect the rear
Left Speaker
2. Use a screwdriver to connect the left
3. Repeat Steps 1–2 to connect the right
Connecting Inputs
CH4 Rear
Right Speaker
(–) wires to the amplifier's
terminals.
CH2 (–)
left and rear right speaker's positive (+)
and negative (–) wires to the amplifier's
, , , and
CH3 (+) CH3 (–) CH4 (+)
minals.
Right Speaker
speaker's negative (–) wire to the ampli-
fier's terminal.
CH3 (–)
speaker's positive (+) and negative (–)
wires to the amplifier's
CH4 (+)
terminals.
(–)
and
CH2 (+)
ter-
CH4 (–)
and
CH4
13