Power Terminal - Samsung SNC-570 User Manual

⑫ ALARM terminal
Alarm signal input terminal (I) is to connect to the external
sensing devices such as infrared sensor, thermal sensor,
etc.
Alarm signal output terminal (O) is to connect to the
external warning devices such as alarm light or siren, etc.
⑬ ETHERNET
The standard RJ-45 connecter is adequate to connect to
10/100 Mbps Ethernet. Electrical power transfer via PoE
(IEEE 802.3af) is available.
Orange colored LED blinking is the sign of successful
data transmission of the camera in the network.
⑭ RESET LED
You can reset all zones of the camera to default level
pressing this button longer than 5 seconds with LED
blinking.
⑮ POWER LED
When you turn on the camera, power LED flashes.
⑯ Power terminal
A terminal is to connect power cable.
⑰ Video output terminal
This terminal is for the video output and is used to set the
focus and other functions when the camera is installed.
⑱ GROUND terminal
An earth ground terminal for camera body and peripherals.
2.2. Section names and functions
25