Care And Maintenance; Tyre Pressure - Pride Mobility Victory XL-8 Owner's Manual

X . C A R E
Your Victory XL-8 requires a minimal amount of care and maintenance. If you do not feel confident in your ability
to perform the maintenance listed below, you may schedule inspection and maintenance with your authorized Pride
provider.
The following areas require periodic inspection and/or care and maintenance.

TYRE PRESSURE

n We recommend you maintain the tyre pressure at 30 psi for optimum Scooter performance.
WARNING! Overinflating a tyre can cause it to explode.
TYRE CONDITION AND TREAD WEAR
n Regularly inspect your Victory XL-8’s tyres for signs of wear.
n Use a rubber conditioner on your Victory XL-8’s tyres to preserve them.
WARNING! Do not put rubber conditioner on the tread area of tyres; the tyres may become
dangerously slippery.
REMOVABLE FLOORMATS
n Your Victory XL-8’s carpet floormat is held on with reusable fasteners and may be removed, cleaned, and
reinstalled as necessary.
EXTERIOR SURFACES
n Bumpers and trim benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use rubber or vinyl conditioner on your Victory XL-8’s vinyl seat; it may become
dangerously slippery.
BATTERY TERMINAL CONNECTIONS
n Ensure the terminal connections remain tight and uncorroded.
Ensure the batteries sit flat in the battery wells.
n
Ensure the battery terminals face the rear of your Victory XL-8.
n
WIRING HARNESSES
Regularly check all wiring connections.
n
Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n
Repair or replace any damaged connector, connection, or insulation before you use your Victory XL-8.
n
Victory XL-8
A N D M A I N T E N A N C E
29