Table of Contents
Advertisement
PRE-RIDE ADJUSTMENTS AND CHECKS
Familiarize yourself with the following checklist before you get on your Victory XL-8. Some of the checks must be
performed prior to getting on your Scooter.
n Have you fully charged the batteries? See V. “Batteries and Charging.”
n Is the manual freewheel lever in the down (drive) position? See IV. “Description.” Never leave the manual
freewheel lever pulled up unless you are manually pushing your Victory XL-8.
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
n Are you positioned comfortably in the seat? See “Getting On Your Victory XL-8,” below.
n Is the seat at the proper height? See VII. “Comfort Adjustments.”
n Is the seat locked securely in place? See VII. “Comfort Adjustments.”
n Is the tiller handle at a comfortable setting and locked securely in place? See VII. “Comfort Adjustments.”
n Is the key fully inserted into the key switch? See IV. “Description.”
n Is the speed adjustment dial set to a slow setting? See IV. “Description.”
n Are you grasping the handgrips with a thumb resting on each throttle lever? See IV. “Description.”
n Does your Victory XL-8’s horn work properly?
GETTING ON YOUR VICTORY XL-8
1. Make certain that the key is turned counterclockwise to power down your Scooter.
2. Stand at the side of your Victory XL-8.
3. Push down on the seat lock lever and rotate the seat until it faces you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Push down on the seat lock lever and rotate the seat until you face forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
OPERATING YOUR VICTORY XL-8
After planning your route:
1. Set the 4 MPH - 8 MPH switch to your desired maximum speed of 6.4 or 12.8 km/hr (4 or 8 mph); then set
the speed adjustment dial to your desired speed.
NOTE: Initially you should set the 4 MPH - 8 MPH switch to 4 MPH and the speed adjustment dial to the
slowest setting. Once you become comfortable with your Scooter, you can increase your speed.
2. Insert the key into the key switch and turn the key clockwise to power up your Scooter.
3. With your hands on the handgrips, use your thumb to gently push the right throttle lever to disengage your
Victory XL-8’s brakes and move forward; the electric brake automatically disengages and the Victory XL-8
accelerates smoothly to the speed you set with the speed adjustment dial.
4. Pull on the left handgrip to steer your Victory XL-8 to the left.
5. Pull on the right handgrip to steer your Victory XL-8 to the right.
6. Move the tiller to the center position to drive straight ahead.
7. Gently release the throttle lever to decelerate and come to a complete stop. The electric brake automatically
engages when your Victory XL-8 comes to a stop.
22
V I .
O P E R A T I O N
Victory XL-8
Advertisement
Table of Contents
