Scanning For Antenna Tv Channels Again; Setting The Hdmi Mode (4K Models Only) - JVC LT-32MAW205 User Manual

Scanning for Antenna TV channels again

There will be times when you need to create a new channel list. For example, you:
•
Change cable providers
•
Reorient your TV antenna
•
Move to a different city with different channels
Whenever you need to update your TV channel list, you can repeat the channel scan.
Tip: Repeat the channel scan from time to time to make sure you are receiving all of
the latest channels. Broadcasters add and remove channels, move channels to
different parts of the spectrum, and change the power levels of their channels
periodically.
Note: Repeating the tuner channel scan unhides all hidden channels.
To repeat the channel scan, from the Home screen menu, navigate to Settings > TV
inputs > Antenna TV > Scan again for channels. Then select Start finding channels to
begin the channel scan process. The screens and options that appear during this
process are identical to those described in
Setting the HDMI
On 4K (UHD) TVs, you can independently configure each HDMI
capabilities of the connected device. From the Home screen menu, navigate to
Settings > TV inputs, and then select an enabled HDMI
mode and then select one of the following settings:
•
Auto Let the TV determine the best setting. Use this option unless your
HDMI ® device does not correctly communicate its HDMI
•
HDMI 1.4
Configure the input for compatibility with HDMI
supports a maximum refresh rate of 30 Hz at full UHD resolution. Most HDMI
devices will work correctly with the TV in this mode.
•
HDMI 2.0 Configure the input for compatibility with HDMI
supports a maximum refresh rate of 60 Hz at full UHD resolution. You must use
How do I set up the TV tuner?
® mode (4K models only)
127
® input to match the
® input. Next, select HDMI
® version compatibility.
®
version 1.4, which
® version 2.0, which
®