Download
Share
Print this page
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Storage
  5. NeroPdvd
  6. Owner's manual

LG NeroPdvd Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Internal Drive

Advertisement

loading

Related Manuals for LG NeroPdvd

Summary of Contents for LG NeroPdvd

  • Page 1 Internal Drive...
  • Page 2 CAUTION : The laser used in the drive can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure.
  • Page 3 This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 2006/95/EC. CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING.

  • Page 4: Table Of Contents

    Contents Important Precautions ........... . . 1 Location and Function of Controls .

  • Page 5: Location And Function Of Controls

    ❏ Occasionally the CD-R and CD-RW discs written by the CD-R/RW drive cannot be read by other CD drives*. These unreadable discs may need to be read using the CD-R/RW drive on which they were written. * The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read compatible (UDF compatible) CD-ROMs.
  • Page 6 Rear Panel (For ATAPI/E-IDE drives) 1 2 3 1. Digital Audio Output Connector (optional) 2. Analog Audio Output Connector (optional) Connect to a sound card. This connection is normally not required. 3. Jumper Connector This jumper determines whether the drive is configured as a master or slave. Changing the master-slave configuration takes effect after power-on reset.

  • Page 7: Installing The Drive

    Installing the Drive (For ATAPI/E-IDE drives) Before installing the drive, please note the following points. ■ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the IDE controller cable.
  • Page 8 Primary Primary connector connector Secondary Secondary connector connector NOTE : A hard disk is normally installed as the Primary Master on the EIDE (ATAPI) interface. Other EIDE peripheral devices such as hard drives and LG drives are then set differently.
  • Page 9 To Install as a Slave Drive To install the drive as a Slave, change the jumper setting on the rear panel to SL. Master drive Master drive Master drive (Booting hard disk) (Other IDE drive) (Booting hard disk) Slave drive - OR - Slave drive (CD/DVD drive)
  • Page 10 Connecting the Sound Card If the computer is using a sound card, the drive is connected to the sound card with an audio cable. The supplied analog audio cable fits most sound cards or one can be purchased at a local computer store.
  • Page 11 PC Connection The drive connects to the motherboard of the host computer using a SATA interface cable. Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side. Be careful not to connect upside down.

  • Page 12: Device Drivers

    Device Drivers When using Windows XP SP2 Home Edition/Professional/Media Center Edition/Vista, no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new drive, will recognize and load native software drivers automatically. For Windows XP Users ■...

  • Page 13: How To Use The Discs

    How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs, don’t attach any stickers or labels to the discs. Using discs with them attached not only causes read and write errors, but data on the disc may be lost due to damage to the disc itself. The Discs in this unit operate at a very high speed! DO NOT use damaged, cracked or warped discs.

  • Page 14: Troubleshooting

    Troubleshooting Before Requesting Service Before calling for service, check this list. • The drive doesn’t have power. • Is the power supply cable from the host computer plugged in? • Is the Power Connector to the drive securely attached? • The system doesn’t start.
  • Page 15 Please visit www.lgservice.com and install the automatic firmware download program, “LG ODD Online F/W update.” This program will automatically check for new firmware releases and download them. It is also included on the software discs that accompany our drives.