Intake Manifold - Subaru 2003 LEGACY Service Manual

3. Intake Manifold

A: REMOVAL
1) Release the fuel pressure. <Ref. to FU(H4SO)-
48, RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
2) Open the fuel flap lid, and remove the fuel filler
cap.
3) Disconnect the ground cable from battery.
4) Remove the air intake duct and air cleaner case.
<Ref. to IN(H4SO)-7, REMOVAL, Air Intake Duct.>
and <Ref. to IN(H4SO)-6, REMOVAL, Air Cleaner
Case.>
5) Disconnect the accelerator cable (A).
6) Disconnect the cruise control cable (B). (With
cruise control model)
(A)
7) Remove the power steering pump and reservoir
tank from bracket.
(1) Remove the resonator chamber. <Ref. to
IN(H4SO)-8, REMOVAL, Resonator Chamber.>
(2) Remove the front side V-belt. <Ref. to
ME(H4SO)-41, REMOVAL, V-belt.>
(3) Remove the bolts which hold power steering
pipes onto the intake manifold protector.
INTAKE MANIFOLD
FU-00009
(B)
FU-00251
FU(H4SO)-15
FUEL INJECTION (FUEL SYSTEMS)
NOTE:
Do not disconnect the power steering hose.
(4) Remove the bolts which install power steer-
ing pump bracket.
(5) Disconnect the connector from the power
steering pump switch.
(6) Remove the power steering tank from the
bracket by pulling it upwards.
FU-00255
FU-00139
FU-00017
FU-00020