Subaru 2003 LEGACY Service Manual page 25

D: ASSEMBLY
1) Install the fuel pipe assembly and pressure reg-
ulator, etc. to the intake manifold.
2) Tighten the bolt which installs the fuel pipes on
the intake manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
3) Connect the right side fuel hose to the injector
pipe, and tighten the clamp screw.
4) Install the fuel injector pipe.
5) Connect the left side fuel hose to the injector
pipe, and tighten the clamp screw.
INTAKE MANIFOLD
6) Install the fuel injectors.
NOTE:
Replace the O-rings with new ones.
FU-00518
NOTE:
Do not forget to install the fuel injector securing clip.
FU-00279
7) Tighten the bolt which installs the injector pipe
on the intake manifold.
Tightening torque:
FU-00171
FU(H4SO)-23
FUEL INJECTION (FUEL SYSTEMS)
(A) O-ring
(B) Fuel injector
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
( A )
( B )
( A )
( A )
FU-00282
FU-00379
FU-00283