Subaru 2003 LEGACY Service Manual page 27

15) Install the fuel pipe protector LH.
Tightening torque:
19 N·m (1.9 kgf-m, 13.7 ft-lb)
16) Connect the pressure regulator vacuum hose
to the intake manifold.
17) Install the EGR valve. <Ref. to FU(H4SO)-35,
INSTALLATION, EGR Valve.>
18) Install the throttle body to the intake manifold.
<Ref. to FU(H4SO)-14, INSTALLATION, Throttle
Body.>
19) Install the ignition coil and ignitor assembly.
20) Connect the connector to the ignition coil and
ignitor assembly.
INTAKE MANIFOLD
21) Install the engine ground terminal to the intake
manifold.
Tightening torque:
FU-00266
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
cracked and that connections are tight.
FU-00265
FU-00286
FU(H4SO)-25
FUEL INJECTION (FUEL SYSTEMS)
19 N·m (1.94 kgf-m, 13.7 ft-lb)
FU-00287