OPERATION AND FUCTIONS
1. Conditions to turn on LCD Light
1) Power input (plugin)
2) When any button on the panel is pushed, first the back light turns on, then
button control is done.
3) When F/R door is open, the light turns on.
2. Conditions to turn off the light
1) The back light turns off 10 seconds after F/R door is closed
2) 1 minute after button control
14. Explanation After Delivery
"FRZ. SET" button
"REF. SET" button
Power Cord
1. Start
Push "REFRIGERATOR SET." button for 3 seconds within 10 seconds just
after power input.
2. Control
1) Electrical components are OFF for 3 hours.
2) Display operates in normal way.
15. Prevention of Compressor Restart
None
Comp. does not start again for 6 minutes though F-sensor is ON.
16. Back Up Function
None
1. Filter Exchange Information : Record as a realtime from the point of Power
2.P FACTOR (Information about Ice Maker)
CONTENTS
INPUT
CONTENTS
INPUT
CONTENTS
INPUT
CONTENTS
Input.
Control Object
Electrical components and LCD
Control Object
Comp.
Control Object
32
REMARKS
REMARKS
REMARKS
6min. delay
REMARKS