onBCR_StateChange
Refer to Table 3-2
Notify the application about the BCR status change data
onGPIO_StateChange
Refer to Table 3-2
Notify the application about the GPIOs status change data
ELOPeripheralManager.BCR_STATE_DEVICE_CONNECTION
ELOPeripheralManager.BCR_STATE_DEVICE_DISCONNECTION
ELOPeripheralManager.BCR_STATE_DATA_RECEIVIED
ELOPeripheralManager.BCR_STATE_PIN_AUTO_DISABLE
ELOPeripheralManager.GPIO_STATE_HIGH
ELOPeripheralManager.GPIO_STATE_LOW
GPIO data
gpio81
gpio82
BCR state
GPIO state
Table 3-2
value
1 << 4
1 << 5
User Manual: i-Series Interactive Signage
SW602242 Rev B, Page 22 of 31
value
1 << 0
1 << 1
1 << 2
1 << 3