Page 2
We the undersigned, ARIENS COMPANY, certify that: Der Unterzeichnete, ARIENS COMPANY, bescheinigt, dass: Wij, de ondergetekenden, ARIENS COMPANY, verklaren dat: Undertegnede, ARIENS COMPANY, attesterer, at: La sottoscritta società ARIENS COMPANY certifica che: Nosotros, los abajo firmantes, ARIENS COMPANY, certificamos que: Undertegnede, ARIENS COMPANY, bekrefter at: Undertecknad, ARIENS COMPANY, intygar att: Allekirjoittanut, ARIENS COMPANY, vakuuttaa, että: My, nijej...
Page 3
Taattu äänitehotaso (L poziom mocy akustycznej (L Som Garantido (L 99 dB 330, 331, 514, 515, 525, 526, 531: 526: 98 dB Ariens Company Brillion, WI 54110-0157 USA Signature Unterschrift Handtekening Underskrift Firma Firma Signatur Namnteckning Allekirjoitus Podpis Assinatura 911514...
• Record Engine Model & Serial numbers here: Serial Number PRODUCT REGISTRATION Label The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting...
Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
NOTATIONS NOTE: General reference information for proper operation and maintenance practices. IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment. PRACTICES AND LAWS Practice usual and customary safe working precautions, for the benefit of yourself and others.
Page 7
Read, understand and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/or damage to unit. ALWAYS remove key (if equipped) and disconnect wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury.
Page 8
A spark arrestor, if used, must be maintained in effective working order by the operator. See your Ariens Dealer or engine manufacturer’s service center. Fuel is highly flammable and its vapors can explode.
DO NOT store unit inside a building with fuel in the fuel tank where any ignition sources are present. Use only accessories which have been approved by Ariens and are properly installed. Check attachments frequently and replace worn or damaged components with manufacturer’s recommended parts.
CONTROLS AND FEATURES Figure 5 1. Engine/Blade Control 2. Wheel Drive Control 3. Adjustable and Folding Handlebars 4. Swivel Wheel Lock (911100) (911101, 330, 525) 5. Grass Bag 6. Rear Door 7. Fuel Tank and Cap 8. Fuel Shutoff Valve (911099, 101, 102) 9.
CONTROLS AND FEATURES See Figure 5 for locations. WARNING: Improper operation can lead to injury. Learn what the controls do and how they work. Thoroughly read and understand entire Operator Manual. CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding.
Page 12
Swivel Wheel Models (911101, 330, 525) To change front wheel cutting height, insert height adjuster pin into the holes that match the desired cutting height and fasten with key ring (Figure 7). To change rear wheel cutting height, move cutting height levers one notch at a time to set the desired cutting height.
Page 13
Start mowing slowly and use speed control rod to gradually increase speed to a safe, comfortable walking pace. Speed control rod should hold the desired speed. If not, adjust speed control bell crank. (See Speed Control Bell Crank on page 22.) Wheel Drive Control CAUTION: Unit will move forward at engine start if wheel drive...
To Bag CAUTION: Check grass bag frequently for wear or deterioration. Replace worn or damaged bag with Ariens original equipment replacement bag only. 1. Shut off unit. 2. Install side discharge cover. 3. Lift rear door. 4. Hook grass bag frame on mounting flange.
EMERGENCY STOPPING To stop the mower in an emergency: 1. Release the engine/blade control. 2. Release the wheel drive control (self- propelled models). 3. Allow all moving parts to stop before leaving operator’s position. STARTING AND SHUT OFF WARNING: Improper operation can lead to injury.
1 inch (2.54 cm) of grass per cutting. CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. Ariens Dealers will provide any service, parts or adjustments which may be required to keep your unit operating at peak efficiency. Should engine require service, contact an Ariens Dealer or an authorized engine manufacturer's service center.
3. Connect spark plug wire. Sharpen the Mower Blades CAUTION: DO NOT sharpen mower blades while on unit. An imbalanced mower blade will cause excessive vibration and eventual damage to unit. Check mower blade balance before reinstalling blades. NEVER weld or straighten bent blades.
REPLACE OIL FILTER (911526) Replace oil filter every 100 hours of use or every season. 1. Change engine oil. 2. Clean around filter. 3. Turn filter counterclockwise to remove (Figure 10). 4. Apply a thin coat of oil onto seal of new filter.
Page 19
1. Place unit on a flat, level surface. 2. Disconnect spark plug wire. 3. Remove fuel cap, place a piece of plastic bag over the opening and tighten cap securely. 4. Tip unit onto left side, opposite the discharge opening (911330, 331, 514, 515, 525, 526, 531).
1. Drive Cover 2. Battery Plug 3. Battery Figure 14 ENGINE/BLADE CONTROL ADJUSTMENT To adjust engine/blade control: 1. Loosen cable nuts away from bracket. OM1010 2. Squeeze z-bend bracket at engine end of cable toward front of unit and hold in place.
DRIVE BELT REPLACEMENT To remove drive belt: 1. Disconnect spark plug wire. 2. Set the right rear wheel to its lowest cutting height, and the left rear wheel to the third cutting height. This position provides clearance between friction disc and drive sheave.
Brush off dirt and debris from all surfaces. Touch up all scratched surfaces to prevent rust. Matching touch-up paint is available from your Ariens Dealer. Do not use abrasives, solvents, or harsh cleaners. Inspection Inspect mower and repair or replace worn or damaged parts to avoid delays when beginning use again.
Page 23
PROBLEM PROBABLE CAUSE Engine is 1. Mower clogged with grass. difficult to restart Cut is poor 1. Worn blade. 2. Too much grass is being removed per cutting. 3. Grass is too wet. 4. Mowing speed is too fast. Grass does 1.
SERVICE PARTS Always use genuine Ariens parts to keep your mower running like new. Description Part Number Air Filter 21535600 (911331, 514, 515, 525, 526) 21529800 (911330, 531) 21540500 (911099, 101, 102) Oil Filter 08266101 (911526) Spark Plug 21534100 (911331, 514, 515,...
Model Number Description Length - in. (cm) Height - in. (cm) Width - in. (cm) Actual Weight - lbs (kg) Cutting Width- in. (cm) Cutting Height - in. (cm) Engine, 4 cycle Model Trim Engine Power - HP (kW) @ Max.
Page 26
Model Number Description Length - in. (cm) Height - in. (cm) Width - in. (cm) Actual Weight - lbs (kg) Cutting Width- in. (cm) Cutting Height - in. (cm) Engine, 4 cycle Model Trim Engine Power - HP (kW) @ Max.