Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ariens Classic LM Series
Summary of Contents for Ariens Classic LM Series
- Page 1 Classic LM Operator’s Manual Manuel du Utilisateur Models 911170 – LM21P Classic (SN 030000 +) 911193 – LM21SP Classic (SN 030000 +) 911194 – LM21SPSW Classic (SN 030000 +) ENGLISH • 05093800A 2/17 FRANÇAIS Printed in USA...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WELCOME ..... . 1 Wheel Drive Control Adjustment ..20 SAFETY......22 SAFETY. -
Page 3: Product Registration
WELCOME Congratulations on your purchase and welcome to the Ariens family! Every machine in the Ariens lineup is designed for long-lasting and unsurpassed performance. We are confident your machine will be part of your family for many years to come. -
Page 4: Safety
Emission controls and components manual. Read and understand all safety can only be adjusted by an Ariens Company messages. dealer or an authorized engine manufacturer's service center. Contact your 1. -
Page 5: Safety Decals
5. Important 1. Safety Decal Description IMPORTANT: Indicates general reference 1. DANGER! information worthy of special attention. SAFETY DECALS The safety decals on your machine are visual DANGER! reminders of the important safety information in this manual. All messages on your unit must be fully understood and carefully followed. -
Page 6: Safety Rules
SAFETY RULES 1.3 Discharge Hazard The following safety instructions are based Discharge Hazard – on the B71.1 specifications of the American NEVER direct discharge National Standards Institute and ISO 5395 in toward people, pets or effect at the time of production. property. -
Page 7: Personal Protection
Ariens dealer before using. Personal Protection Be sure the area is clear of bystanders before operating. Stop machine if anyone DO NOT wear loose clothing or jewelry and enters the area. -
Page 8: Operating Conditions
Do not pull machine backward unless Watch for holes, ruts, bumps, rocks, or other absolutely necessary. Always look down and hidden objects. Uneven terrain could cause behind before and while moving backward. a slop and fall accident. Tall grass can hide obstacles. -
Page 9: Transporting Unit
Never make any adjustments or repairs with the engine (motor) running. *Disconnect the Use only Ariens Company-recommended spark plug wire and ground against engine attachments that are appropriate to your use to prevent unintended starting. -
Page 10: Assembly
Engine must not start. If engine starts, stop engine by disconnecting spark plug while wearing gloves. Contact an authorized Ariens dealer for adjustment or repair. See Operator Presence Control (OPC) Handle on page 10. 1. Mower Unit 2. -
Page 11: Controls And Features
CONTROLS AND FEATURES Model 911170 Figure 4 1. Operator Presence Control (OPC) 11. Rear Cutting Height Lever (2) Handle 12. Front Cutting Height Levers (2) 2. Wheel Drive Control 13. Primer Bulb (Models 911193, 194) (Models 911193, 194) 14. Air Filter 3. -
Page 12: Operation
3 seconds. Check this feature frequently. If feature fails to operate, disconnect spark plug wire and adjust as necessary or have the unit inspected and repaired by an authorized Ariens dealer before using. Front 1. Cutting Height Lever... -
Page 13: Optional Controls
Model 911194 Speed Control Models 911193, 194 To change front wheel cutting height, insert height adjuster pin into the holes that match The speed control rod changes the mower’s the desired cutting height and fasten with key forward travel speed. ring (Figure 6). -
Page 14: Filling The Fuel Tank
Wheel Drive Control Unlock - Wheel Models 911193, 194 Swivels CAUTION: Unit will move forward at engine start if wheel drive control is engaged. ALWAYS release wheel drive control before starting unit. Lock - Wheel Held See Figure 8. Straight NOTE: Engine must be running for wheel drive to propel unit. -
Page 15: Fuel Stabilizer
CAUTION: Grass bag material is subject to wear and deterioration under normal usage. Check bag frequently for necessary replacement. Replace worn or damaged bag with Ariens original equipment replacement bag only. 1. Shut off unit. 2. Install side discharge cover. EN - 13... -
Page 16: Emergency Stopping
To Side Discharge See Figure 11. 1. Shut off unit. 2. Remove grass bag. 3. Install Mulchmaster plug. (See Figure 12.) 4. Remove side discharge cover and retain hardware. 5. Attach side discharge deflector to studs on mower. Make sure deflector covers discharge opening. -
Page 17: Mowing Tips
Safety section before proceeding. Check • • Engine Cooling Ariens Dealers will provide any service, parts or adjustments which may be required to Check • Muffler keep your unit operating at peak efficiency. Should engine require service, contact an... -
Page 18: Check Operator Presence Control Handle
NEVER weld or straighten bent Check grass bag frequently for wear or blades. deterioration. Replace worn or damaged bag with an Ariens original equipment replacement bag only. 1. Remove mower blade from unit. Discard mower blade if: CLEAN UNIT •... -
Page 19: Check Drive Belt
3. Check mower blade balance. Slide mower blade on an unthreaded bolt. A balanced blade should remain in a horizontal position. If either end of mower blade moves downward, sharpen the heavy end until blade is balanced (Figure 14). 4. Install mower blade on unit. 5. -
Page 20: Service & Adjustments
2. Pull speed control handle inward and SERVICE & remove speed control rod from slot at ADJUSTMENTS top of handlebar. See Figure 17. 3. Simultaneously fold speed control rod and handlebar onto unit. See Figure 17. CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. -
Page 21: Operator Presence Control Handle Adjustment
7. Adjust rear wheels to the same cutting 2. Squeeze z-bend bracket at engine end height. of cable toward front of unit and hold in place. See Figure 20. Figure 20 3. Pull cable down from bracket until there is no slack in cable. See Figure 21. 1. -
Page 22: Wheel Drive Control Adjustment
5. Tighten upper cable nut until bracket is secure between cable nuts. See Figure 23. Approx. .030" (0.7mm) 1. Friction Disc 2. Aluminum Drive Plate Figure 23 Figure 25 6. Engage operator presence control handle. Measure distance between Check the adjustment with the engine off and middle of z-bend and cable bracket. - Page 23 To increase the gap between the friction disc and the aluminum drive plate: 1. Loosen the lower cable nut on the wheel drive control cable, and then tighten the upper cable nut against the adjuster bracket. See Figure 26. To increase the gap, To decrease the loosen the lower gap, loosen the upper...
-
Page 24: Safety
01137000 all surfaces. Touch up all scratched surfaces to prevent rust. Matching touch-up paint is Drive Belt 07217100 available from your Ariens Dealer. Do not use Friction Disc 03248300 abrasives, solvents, or harsh cleaners. Inspection ACCESSORIES Inspect mower and repair or replace worn or... -
Page 25: Troubleshooting
TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION 1. Fuel tank empty or low. 1. Check fuel level. Fill tank if necessary. 2. Spark plug wire loose or off. 2. Check connection. Engine will not start 3. Operator presence control 3. Check cable. Adjust, repair or handle cable detached, broken, replace as necessary. -
Page 26: Specifications
SPECIFICATIONS Model Number 911193 911194 911170 Description LM21SP LM21SPSW LM21P Length – in. (cm) 61.5 (156) Height – in. (cm) 38 (96.5) Width – in. (cm) 23 (58.4) Actual Weight – lbs (kg) 109 (49.4) 125 (56.7) 99 (44.9) Cutting Width – in. (cm) 21 (53.3) Cutting Height –... -
Page 27: Consumer Mowing Equipment Limited Warranty
Register the product immediately at the time of sale. If the dealer does not register the product, the customer must complete the product registration card in the literature package and return it to the Ariens Company, or register the unit online at www.ariens.com, www.gravely.com, www.countax.com. - Page 28 Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this warranty and may void the warranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this war- ranty.
- Page 30 655 West Ryan Street Brillion, WI 54110 ariensstore.com ariens.custhelp.com parts.ariens.com...
Need help?
Do you have a question about the Classic LM Series and is the answer not in the manual?
Questions and answers