Table of Contents
Advertisement
troubleshooting
TROUBLESHOOTING
If the product does not function properly, please see the below for trouble shooting.
PROBLEM
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The SENS-UP function does not
work.
The Motion Detection function does
not work.
Color is not correct.
The screen fl ickers continually.
When coaxial communication is
not available:
SOLUTION
Check that the power cord and line connection between the
camera and monitor are fi xed properly.
Check that you have properly connected VIDEO cable to the
camera VIDEO output jack.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change the camera
position.
Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75Ω / Hi-z properly.
Check that you have properly connected the camera to an
appropriate power source.
Check that AGC of EXPOSURE SETUP menu is 'OFF'.
Check that SHUTTER of EXPOSURE SETUP menu is 'A.FLK' or
'MANUAL'.
Check that MOTION DET of SPECIAL SETUP menu is 'OFF'.
Check the setting of WHITE BAL SETUP menu .
Check that direction of camera turns toward the Sun.
Make sure that the camera and monitor are installed within the
recommended distance.
Use the video amplifi er equivalent to coaxitron if the
recommended installation distance is exceeded.
English_39
Advertisement
Table of Contents
