Tecsun PL-360 Operation Manual page 10

Fm stereo / mw / sw dsp receiver
Hide thumbs Also See for PL-360:
Table of Contents

Advertisement

Method 4:
AUTO BROWSE MEMORY
1. Turn on the radio, short press
the [VM] button with memory
page shows in the upper right
corner and disappears in 5
seconds.
2. Long press [VM] button with
"
" flashing to scan
from one memory to another,
staying on each station
memory for about 5 seconds.
3. To stop auto search memory,
simply press the [VM] button.
Note: Please first read [Working with Memory] in next
page before using this function.
8
flashing
SLEEP
Auto-scan memory with
pre-listening
TURN OFF THE ALARM
When the radio is turned on by the alarm function with radio,
you can short press [POWER] button to continue listening
radio afterwards.
Short press [POWER] again to turn off the radio.
DISPLAY MODE
With radio OFF: Short press the [DISPLAY] button to view
on Temperature, Alarm time.
With radio ON: Short press the [DISPLAY] button to view on
Alarm time, Temperature, Local time, signal strength/ SNR.
KEY LOCK FUNCTION
Long press the [
] button with "
the display to lock up all keys / buttons. Long press it again
with the symbol disappears to unlock the keys/buttons.
FM ST. (FM STEREO) BUTTON
While listening to FM station via stereo earphones, short
press the [FM.ST] button with "
side of the frequency in the display to activate the STEREO
mode once it receives the FM stereo station.
13
" symbol appears in
" appears over the left

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents