Shure WL50 User Manual page 7

SPECIFICATIONS WL50
Condenser
Type
(electret bias)
Polar Pattern Omnidirectional
Output Impedance N/A
Recommended Min. 20 kW
Input Impedance
Output Level –45.0 dBV/Pa
(1 Pa=94 dB SPL)
Maximum SPL 133 dB at 1%
THD/20k W load
Frequency Response 20 to 20,000 Hz (see Figure 1)
Dynamic Range 103.0 dB
Output Noise 30 dB typical;
(equivalent SPL, 33 dB maximum
A-weighted)
{
WL50–LO
Condenser
(electret bias)
Omnidirectional
N/A
20 kW
–54.0 dBV/Pa
(1 Pa=94 dB SPL)
142 dB at 1%
THD/20k W load
103.0 dB
39 dB typical;
42 dB maximum
{ }
MC50
Condenser
(electret bias)
Omnidirectional
136 W actual
(rated at 150 W)
N/A
–41.0 dBV/Pa
(1 Pa=94 dB SPL)
138 dB at 1%
THD/1 k ohm load
108.0 dB
30 dB typical;
33 dB maximum
7
{
WL51 MC51
Condenser Condenser
(electret bias) (electret bias)
Cardioid Cardioid
136 W actual
N/A
(rated at 150 W)
20 kW N/A
–50.0 dBV/Pa –46.0 dBV/Pa
(1 Pa=94 dB SPL) (1 Pa=94 dB SPL)
138 dB at 1% 143 dB at 1%
THD/20k W load
THD/1 k ohm load
103.0 dB 108.0 dB
35 dB typical; 35 dB typical;
38 dB maximum 38 dB maximum
}