Panasonic BB-HPL11 Instruction Manual page 21

■About the status screen
It will display the status of the adapter.
Item
Bootloader
※
Version
Firmware
Version
Operating mode
This unit MAC Address
Other parent machine
PLC Link state
(Display handset only)
Base unit MAC Address
(Display handset only)
※ Boot loader is a program for starting the firmware.
It will display the boot loader version.
It will display the version of the firmware.
Or the adapter is set in either the master unit / slave unit
It is displayed.
Adapter MAC It will display the address.
It will display the "Yes" / "No".
On the power line in the same house, if another master unit is present,
It appears to be "Yes".
In the case of "Yes", you may be affected by the communication.
It will display the connection status of the master unit.
The place to "connect", not connected if it is connected to the master unit
When it will appear as "disconnected".
Adapter during operation as a slave unit, the registration destination of the
parent machine MAC
It will display the address.
Content
Its
Of
Othe
Of
Mac
Noh
Twenty one