Other Features
Following cases, please initialize the adapter.
The master unit, if other than they own slave unit is registered
●
→The parent machine, please all of the handset that have registered to initialize.
During the registration of the handset, when you have caused the error
●
→Please have a child machine during registration to initialize.
When you register the adapter
●
→Please be the handset to be registered to initialize.
About the adapter initialization button of Three We will continue
to push seconds
●
Adapter of the light starts blinking.
Adapter of the lamp is lit.
When the flashing lamp is lit after you stop adapter initialization is complete.
●
The reset button
About in those of thin
rod-likeThreeSecond
I press slowly
●
After initialization,Thirty Seconds, please do not disconnect the power plug.
There is that the initialization of internal information has not been completed.
Initialization button, such as a pencil or sharp pen, it is not pressed by the thing easily my tip
●
Please de.
●
When you initialize the handset, registration information to the parent machine is erased. When used,
Please re-registered with the base unit.
(+ 10 Page)
When the base unit is initialized, it should be re-registered all handsets that have registered
●
There. (+ 10 Page)
Sixteen
Initialize the adapter
PLC
LAN
MASTER
During initialization lamp
Blinks.