You Want To Register The Adapter - Panasonic BB-HPL11 Instruction Manual

Prepare the adapter
The first time "HD-PLC"If you intend to use the, when you are adding the handset, base unit or
After initialization the handset, please register the adapter with the following procedure.
That the master unit and slave unit change-over switch of the master unit is in the
base-side
Check ( )
Parent machine, cordless handset switching switch handset adapter to be registered
as a slave unit
It is confirmed that it is on the side ( )
Each of the power cord is connected to the adapter, the power plug is the same
Plugging into a power outlet ( , )
●
When operating the base unit handset switching switch, disconnect the power cord (power OFF)
Please switch in the state.
When you plug the master unit and the slave unit to another power outlet, you may not be registered.
●
Power plug, please plug directly into a power outlet on the wall.
●
Ten

You want to register the adapter