Panasonic BB-HPL11 Instruction Manual page 23

Eo light plc adapter
Table of Contents

Advertisement

[Account]
Change the authentication screen of the password that is displayed when you connect to the configuration screen
of the adapter
You.
If you want to change:
Please press the "Settings" button and enter the password.
A confirmation screen appears "OKPlease press ".
Since the change appears to complete and restart screen by pressing the "restart" button adapter
Please restart the others.
After adapter restart, you can open the setup screen in the changed password.
so as not to forget to change your password, please note.
If you forget your password, press the reset button of the adapter, it is initialized
Give me.
The password of factory shipment value "999999It will return to. "
However, so it will delete all registered information is also, I go to register the adapter again
Sai.
For password, please properly managed at their own responsibility.
The characters that can be used in the password alphanumeric characters (A-Z,a-z,0-9) Only.
Uppercase and lowercase letters are distinguished.
[Space],["],['],[&],[<],[>] You can not use such.
Half size Six Or more characters,Twelve Please set the letter below.
User name can not be changed.
Its
Of
Othe
Of
Mac
Noh
Twenty
three

Advertisement

Table of Contents
loading

Table of Contents