Table of Contents
Advertisement
Getting started
Overview of functions
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation and set-up. It includes automatic storing of :
- picture controls (Brightness, Sharpness,....)
- settings
Other functions on the control units are:
-
switching between standby and operational modes
-
switching to "pause" (blanked picture, full power for immediate restarting)
-
direct access to all connected sources
-
variable adjustment speed : when pushing continuously on the arrow keys or the picture keys, the adjustment will be executed
in an accelerated fashion.
10
image 3.2
RCU and local keypad
1
Function keys : user programmable keys with functions for direct access.
2
ADJ. : ADJUST key, to enter or exit the adjustment mode.
3
Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil,
followed by pressing one digit button between 0 and 9.
4
Selection key : no function for this projector
5
PAUSE : to stop projection for a short time, press 'PAUSE'. The image disappears but full power is retained for immediate
restarting.
6
STBY : stand-by button, to start projector when the power switch is switched on and to switch off the projector without switching
off the power switch.
7
Mute : no function in this projector
8
Help : on line help information (not yet available)
9
Digit buttons : direct input selection.
10 Audio controls : optional (Appendix A)
11 Picture controls : use these buttons to obtain the desired picture analog level.
12 PHASE : not used.
3 - 2
1
F3
F2
F4
F1
F5
2
3
EXIT
ADJ
4
ENTER
5
6
PAUSE
TEXT
7
PHASE
9
0
8
SHARPN
8
7
TINT
9
5
6
COLOR
3
4
BRIGHTN
1
2
CONTR
TREBLE
BALANCE
BASS
VOL
18
17
16
15
14
13
12
11
Stand-by
Pause/Park
Sharpness
Tint
Color
Brightness
Contrast
5976419 BARON 908 04122001
Advertisement
Table of Contents
