If your battery has a different connector, do not try to modify your connector or the charger. Visit your local hobby dealer and purchase a Radient Primal Universal Balance Adapter (RDNA0003) for use with your balance plug. 8. Main charging lead a.
Page 4
Although great for first time users, Radient RC products are indeed advanced and sensitive electronics that could result in injury if used improperly. Always use caution and common sense as failure to operate your Radient RC product in a safe and responsible manner can result in damage to the product or other properties.
Page 5
THIS PART IS REALLY IMPORTANT, PLEASE READ AND UNDERSTAND IT WARNING: The Radient Primal charger has the capability of charging both LiPo and NiCd/NiMH (NiXX) batteries which require significantly dif- ferent charging modes. It is extremely important to choose the correct charging mode when charging your batteries. Choosing the wrong charging mode can cause fire or explosion.
CHARGING A LiPo BATTERY The Radient Primal charger supports charging of LiPo batteries using Constant-Current Constant-Voltage (CC-CV) charge mode for 2s-3s cell configurations with available charge current range from: • 0.5-4 Amps for 2s (7.4V) configuration • 0.5-4 Amps for 3s (11.1V) configuration ›...
Page 7
CHARGING A NiCd/NiMH (NiXX) BATTERY The Radient Primal charger supports charging of NiXX batteries from 1-8 cell series configurations with a delta peak value of 8mV and available charge current range from: • 1-4 Amps for 1-8 cell (1.2V-9.6V) configurations ›...
Page 8
• Before every use, inspect the input and output power cords and plugs and discontinue use if there are any signs of damage. › Contact your local hobby dealer or Radient RC Customer Support for assistance with repair needs. › NOTE: Continued use of a damaged battery or charger will void the warranty and could cause personal injury and property damage.
TROUBLESHOOTING GUIDE Problem / Symptom Possible Cause Possible Solution Battery voltage too low Battery may be dead and in need of replacement Battery voltage could already indicate a full charge, Battery voltage too high attempt to use your battery then charge again. Input voltage is too low Check for stable input power with proper voltage Check battery connection and ensure red wires are...
Page 10
› The nominal voltage of a NiXX battery cell is listed at 1.2V. › The Primal charger will terminate the charge of a NiXX battery pack when it measures a maximum voltage of the battery pack in a specified range and then also measures a drop in that voltage of 8mV.
Page 11
CHARGING A NiCd/NiMH (NiXX) BATTERY Storage Voltages: • Although the Primal charger does not offer discharge capabilities it is important to understand this information about your batteries since it is critical to both the safety of the battery and the cycle life.