PACKAGE CONTENTS • [1] Reflex Charger • [1] Documentation package • [1] HCT to Mini Adapter COMPATIBLE BATTERY TYPES FOR USE WITH YOUR CHARGER • Lithium Polymer (LiPo) › 2s (7.4V) - 3s (11.1V) UNBOXING 1. Remove the charger from the box. a.
Therefore this product is not intended for use or maintenance by children without direct adult supervision. Radient RC, and your local hobby dealer shall not be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, arising from the use, misuse, or abuse of this product or any product required to operate or maintain it.
Page 4
• Always allow batteries to completely cool before charging. › NOTE: Only use genuine replacement or aftermarket parts available from your local dealer to ensure proper operation of your Radient RC product. • Avoid charging on or around flammable items.
Page 5
(or voltage), and chemistry type as LiPo only. CHARGING A LITHIUM POLYMER (LIPO) BATTERY... The Radient Reflex charger supports charging of LiPo batteries at a specific rate per configura- tion. 2s (7.4V) LiPo batteries wiill charge up to 2 Amps, 3s (11.1V)batteries will charge up to 1.5 Amps.
...CHARGING A LITHIUM POLYMER (LIPO) BATTERY CONTINUED 3. Press the Start button and hold until the ‘Status’ LED turns solid RED (Approximately 3 seconds) to start the charging cycle. a. NOTE: If the LED begins to flash RED or if the charger is unresponsive to your input, see the troubleshooting guide at the back of this manual.
STORAGE AND DISPOSAL Storage: • Always unplug the AC power cord for storage. Upon removal and reinstallation, alwasy check for damaged/frayed wires and debris that may have fallen into the socket of the cord or charger port. › Warning: Never “kink” (or bend sharply) any electrical wires. Doing so may dam- age the internal electrical wire even if the outside appears undamaged.