Troubleshooting; Cleaning - NewAir AF-520B Owner's Manual

Misting Nozzle Maintenance:
1. To clean the misting nozzles, use a pair of needles nose pliers to twist each
nozzle counterclockwise.
2. Once removed, soak the nozzles in white vinegar for 2 hours.
3. Rinse each nozzle with water and place back into the front fan grill.
4. Twist clockwise until secure. DO NOT over tighten.

TROUBLESHOOTING

Problem
The fan will not
operate.
The fan will not
operate.

CLEANING

1. Be sure to unplug the power cord from the outlet before cleaning.
2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.
Thoroughly remove soap film with clean water.
3. Be sure not to get water or other liquid inside of the motor.
- Water pressure must not exceed 555 153 kPa (5.62 kfg/cm2)
- The hose must be in good condition
Possible Cause
The fan isn't plugged in and/or
the electrical outlet isn't
working properly.
Obstructions are keeping the
fan from working.
http://www.NewAir.com
8
Corrective Action
Make sure the fan is plugged
in and/or the electrical outlet
is working properly.
Check for obstructions. If you
find an obstruction, turn the
fan off.Unplug the fan and
carefully remove the
obstruction. Plug the fan in and
turn it on again by referring to
the operating instructions.