Pioneer inno xm2go User Manual page 24

Using Your inno Alone
4. To install the swivel mount, first find a suitable location. The swivel mount's adhesive is
very strong and may be difficult to remove. Do not install this mount on leather surfaces
and make sure the air temperature is at least 60°F (15°C).
Clean the mounting surfaces with the surface preparation kit. Peel away the adhesive liner
and firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours before
using the mount.
If you need to remove the mount, carefully lift the adhesive pad with your fingers or a
spoon. Warming with a hair dryer for several minutes will help soften the adhesive.
24 Using Your inno Alone
You can adjust the tension of
the mount with a screwdriver.