Assembling The Wheel Brace; Removing The Wheel Trim - Ford KUGA Owner's Manual

E93020
Note: You can use the wheel brace to raise
and lower the jack.

Assembling the Wheel Brace

Type One
WARNING
The screw-in towing eye has a
left-hand thread. Turn it
counterclockwise to install it. Make
sure that the towing eye is fully tightened.
E122502
Insert the screw-in towing eye into the
wheel brace.
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, First Printing
Wheels and Tires
Type Two
E159432
Note: When jacking your vehicle, you will
need to rotate the wheel brace 180 degrees,
pivot the wheel brace back to the original
position before rotating again.
Using the Wheel Brace as a Jack Handle
1.
2. Rotate the wheel brace 180 degrees.
3. Return the wheel brace to the original

Removing the Wheel Trim

Type One
E122314
1.
2. Remove the wheel trim.
216
Attach the wheel brace to the jack
horizontally.
position and repeat as necessary.
1
Insert the wheel trim remover.
2