Base Station Settings; Protecting Against Unauthorised Access; Activating/Deactivating; Music On Hold - Siemens Gigaset SL370 User Manual

Base station settings

The base station settings are carried out
using a registered Gigaset SL37H handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must be entered when, for
example, registering/de-registering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
¢ ¢ ¢
w Ð
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For
security the PIN is shown as
four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key ÷ on the base station while
reconnecting the power cable to the base
station. Release the key after a time.
The base has now been reset and the
system PIN 0000 set.
System PIN
.
§OK§
§OK§

Activating/deactivating

music on hold

¢ ¢
w Ð
Press to activate or deactivate music
§OK§
‰
on hold ( = on).

Repeater support

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
Eco mode is disabled.
¢ ¢
w Ð
¢
Repeater Mode
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with
Please note:
Repeater support and eco mode (see page 12)
cancel each other out, i.e. both functions can-
not be used at the same time.
Restoring the base station to
.
the factory settings
When the settings are restored
u
eco mode is disabled,
u
handsets are still registered,
u
the system PIN is not reset,
u
the SMS information services are not
reset.
¢ ¢
w Ð
~
Enter the system PIN and press
§OK§
Press the display key.
§Yes§
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status).
Base station settings
¢
Base Music on hold
¢
Base Add. Features
‰
.
¢
Base Base Reset
.
.
§No§
51