Table of Contents
Advertisement
Chapter 1 Hardware Installation
Push the latch on the right (1) to release the front handle of the hard drive tray (2). Gently slide out
the hard drive tray (3).
1
3
2
This is the empty hard drive tray.
Place a compatible hard drive into the hard drive tray as shown.
Hard Drive
Tray
Turn the tray over while holding the hard drive inside and fasten the hard drive to the tray with the
provided screws. The screw positions for 3.5 inch hard drives and 2.5 inch hard drives are shown in
the figure.
7
UNS Series Hardware Installation Guide
Advertisement
Table of Contents
