A. Mixer - Reloop Jockey 3 remix Operation Manual

For more information, please visit reloop.com

Hide thumbs Also See for Jockey 3 remix:

Table of Contents

-2-

RELOOP JOCKEY 3 REMIX

A. MIXER

1. CROSSFADER : Blends audio between the channels assigned to the left and right side of

the crossfader.

2. VOLUME : Volume Faders. Faders alter the sound of the selected software Deck,

depending on the position of the (8) Deck Switches. Faders do alter the sound of the

software deck, if the switchers are on IN1/IN2 position.

3. PFL. Press this button to send this channel's pre-fader signal to the Cue Channel for

monitoring. When engaged, the button will be lit. Cued deck deck depends on the (9) Deck

Switches. Press SHIFT and then one of the PFL buttons to enable/disable the Fader Start to a

deck. When Fader Start is enabled the Leds of the PFL buttons will flash.

4,5,6. EQ : Adjusts the high (treble) / middle (mid) / low (bass) frequencies.

7. GAIN : Adjusts the audio level (gain) of the corresponding channel in the software or

hardware Input.

Table of Contents

Do you have a question about the Jockey 3 remix and is the answer not in the manual?