Vertical Main-Command Dial\Vertical Sub-Command Dial\Others; Rear Cover Unit\ I/F Cover - Nikon D3 VBA18001 Repair Manual

Vertical main-command dial\Vertical sub-command dial\others

Rear cover unit\ I/F cover

・Take out the two screws (#1512)
and two screws (#1524).
・Detach the rear cover unit, and
remove the three FPCs.
※ Be careful of the connection-FPC when removing.
・ Take out the two screws (#1589) and
one screw (#1548).
・ Remove the IF cover (#391).
※ The convex portion is placed under
the top cover, so remove the I/F block
unit by pulling its lower side.
#1546
#918
#1570
#B910
A
#1567×2
#932
#921
#B28
#27
#903
#911
#733
#734
#901
Rear cover unit
#1512×2
- Ｄ  ･ -
logo Q0440 forGraphic
070518 Gdesign ito
VBA18001-R.3719.A
#926
#1567×3
#1567×2
#925
#1604
#933
#1591
#912
#25
A
#1598×4
#936
#937
#1524×2
INC
#B923
#1589×2
#1548
#391