Dodge Charger SRT 2014 Owner's Manual page 347

• ParkSense® — If Equipped
The ParkSense® system will scan for objects behind the
vehicle when the transmission shift lever is in REVERSE
and the vehicle speed is less than 11 mph (18 km/h). It
will provide an alert (audible and/or visual) to indicate
the proximity to other objects. The system can be enabled
with Sound Only, or Sound and Display. To change the
ParkSense® status, touch and release the "Sound Only"
or "Sounds and Display" button. Then touch the arrow
back soft-key. Refer to "ParkSense®" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
• Front ParkSense® Chime Volume — If Equipped
The ParkSense® Chime Volume settings can be selected
from the EVIC or Uconnect® System — if equipped. The
chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
To make your selection, touch the "ParkSense® Chime
UNDERSTANDING YOUR INSTRUMENT PANEL 345
Volume" soft-key, until a check-mark appears next to
setting, indicating that the setting had been selected.
Touch the arrow back soft-key to return to the previous
menu. ParkSense® will retain its last known configura-
tion state through ignition cycles.
• Tilt Mirrors In Reverse — If Equipped
Touch the "Tilt Mirrors In Reverse" soft-key to change
this display. When this feature is selected, the outside
rearview mirrors will tilt downward when the ignition is
in the RUN position and the transmission shift lever is in
the REVERSE position. The mirrors will move back to
their previous position when the transmission is shifted
out of REVERSE. To make your selection, touch the "Tilt
Mirrors In Reverse" soft-key and select "ON" or "OFF."
Then touch the arrow back soft-key.
• Blind Spot Alert — If Equipped
Touch the "Blind Spot Alert" soft-key to change this
display. When this feature is selected, the Blind Spot Alert
4