Traffic Statistics - Tenda 300M 11N User Manual

If you are sharing a 4M broadband connection with a neighbor, who always
exhausts the bandwidth resource downloading data, this feature will help.
Simply specify half of the 4M bandwidth for your neighbor's PC (say,
192.168.0.100) and you will no longer need to struggle for bandwidth and
your neighbor will only get up to 2M bandwidth. To do so, follow instructions
below:
1 . C h e c k E n a b l e .
1 . C h e c k E n a b l e .
2 . Input "192.168.0.100" in both IP address boxes.
2
3 . Select Download.
3 .
4 4 . Enter "256" in both bandwidth range fields. .
5 5 . Check Enable. .
6 . Click Add To List
6 .
7 . Click OK.
7 .

5.2 Traffic Statistics

Traffic Statistics allows you to see at a glance how much traffic each device
in your network is using.
Enable Traffic Statistics: Check/uncheck the box to enable/disable the
Traffic Statistics feature. To see at a glance how much traffic each device in
your network is using, enable this option. However usually, disabling it may
boost your network performance. This option is disabled by default.
However, once enabled the page refreshes every five minutes.
OK: Click to activate corresponding settings.
IP Address: Displays IP addresses of PCs connected to the device.
Uplink Rate: Displays the upload speed (KByte/s) of a corresponding PC.
Downlink Rate: Displays the download speed (KByte/s) of a corresponding
PC.
Sent Message: Displays the number of packets sent by a corresponding PC
via the device since Statistics is enabled.
Sent Bytes: Displays the number of Bytes sent by a corresponding PC via
300M 11N Wireless Broadband Router
50