Setting The Alarm - SoundFreaq Sound Rise User Manual

1
14
1 Press and hold Alarm 1
until the hour starts blinking.
2
Press the +/– buttons to adjust the hour.
3
Press Set button to confirm the hour.
4 Repeat steps 2 and 3 to complete setting the alarm. The alarm
2
setting options are:
3
Note: To wake up to music from your phone or other device,
you must first pair Sound Rise.
Note: When waking up to Bluetooth, Sound Rise will "play" the
current song on your connected device. If your device is not
available when the alarm goes off, Sound Rise will wake you
with its built-in chime.

Setting the Alarm

or Alarm 2
- Hour
- Minute
- AM/PM
- Day of the week (everyday, weekends, weekdays
or a specific day of the week.)
- Wake up sound (Bluetooth, FM radio, Line in or
built-in chime)
- Wake up sound maximum volume
button for 2 seconds
15