Page 3
Welcome to your new Sound Rise! We created Sound Rise for music lovers like you. Start the day with your favorite tunes, rock out while getting ready to go and relax with music as you fall asleep. Here are some helpful tips to get you started.
Page 4
Music source Indicates music source when speaker is on as Bluetooth, Aux Line In or FM Radio Bluetooth Line In Radio Alarm Indicates if alarm is set for weekdays, weekends frequency or everyday. Alarm can also be set for a specific Weekday Weekend Everyday...
Page 5
Getting to know Sound Rise Volume Music Bluetooth Play Control Source Pair Alarm Snooze Alarm & Sleep Time Set Timer...
Page 6
USB Charging Tone Port Power Antenna Control Auxiliary Screen Backup battery compartment Line In Dimmer (bottom of Sound Rise)
Page 7
Use the USB charging cable provided with your device. DC Power Port to plug in the DC power adapter included with your Sound Rise. Auxiliary Line In Connect any device with a standard headphone jack using a Line in cable (not included) to listen to audio.
Setting the Time Press and hold SET button for 2 seconds until the hour starts blinking. Press the +/– buttons to adjust the hour. Press SET button to confirm the hour. Repeat steps 2 and 3 to complete setting the time. The time setting options are: - Hour - Minute...
Note: To wake up to music from your phone or other device, you must first pair Sound Rise. Note: When waking up to Bluetooth, Sound Rise will “play” the current song on your connected device. If your device is not available when the alarm goes off, Sound Rise will wake you with its built-in chime.
Using the Alarm Press Alarm 1 or Alarm 2 button and the alarm settings will be displayed and the alarm will be turned on. When the alarm is on, the Alarm 1 or Alarm 2 icon will be displayed. To turn the alarm off, press and hold the Alarm 1 Alarm 2 until the icon is not shown (the display will briefly display “OFF”).
Press + / - to set the volume. Press SNOOZE button or hold the for 2 seconds to turn the audio off. Press the TONE button on the back of Sound Rise to select your preferred sound equalization tone for audio playback: flat (default), warm or bright.
Bluetooth mode. Press PAIR on Sound Rise to start pairing mode. The Bluetooth icon on Sound Rise’s display will flash rapidly. On your phone, tablet or computer, open your Bluetooth settings menu to detect available devices. Once Sound Rise is detected, select it from the list of available devices to connect.
Bluetooth mode. You can change the volume by either using the volume buttons on Sound Rise or changing the volume on your paired device. For max volume, turn both volumes to maximum. Use the Play Control buttons on Sound Rise to remotely control...
Listening to the Radio Connect the FM antenna to the antenna jack. Press the Music or SNOOZE button to turn on the system. Press the Music button repeatedly until appears on the display to select Radio mode. Press the <</>> buttons to search a desired radio station for listening.
Page 23
Programming Radio Presets There are six radio presets to save your favorite FM stations. To save a preset: Tune to the preferred station. Press SET. The preset number will flash “P01”. Press + / - to change the preset number. Press SET to save the current station to the preset number selected.
Page 25
Listening with Line In Connect any device with a standard headphone jack using a Line in cable (not included) to the AUX IN on the back of Sound Rise. Press the Music or SNOOZE button to turn on the system.
Setting the Sleep Timer Use the sleep timer to enjoy music for a specified amount of time. Press the sleep button repeatedly to select the desired sleep timer duration 15 --> 30, 60, 90, 120, OFF. The sleep icon will be shown on the display. When the time is displayed, tap to briefly display the remaining sleep time.
Setting Screen Brightness Press DIMMER on the back of Sound Rise to change the screen brightness. When the screen brightness is off, press any button to momentarily turn the display on to see the time or operate any functions. When the alarm goes off and the screen brightness is off, the display will automatically turn on.
Page 30
USB Phone Charging Port (Power out to charge phone)
Sound Rise. Simply connect your device to the USB Port on the back of Sound Rise to begin charging. Note: Please use the charging cable that was provided with your device. The maximum charging output of Sound Rise is 5V / 1A.
Page 32
Meet our whole family of award-winning wireless speakers. soundfreaq.com...
Need help?
Do you have a question about the Sound Rise and is the answer not in the manual?
Questions and answers