NavRoad RECO2 User Manual page 131

Explorer
Press Explorer to launch file explorer. This function allows to browse through folders and files.
Calibration
To calibrate touch screen press precisely the center of the moving cross in it's every position on the
screen. Precise calibration is required to operate correctly the touch screen.
System info
Press System info, to display information about firmware version. This function is not intended to
check the version of your navigation software.
Default.
Press Default to restore factory settings. This function does not affect navigation software settings.
USB mode
Press USB Mode button to choose the method of connection to a computer. Two modes are
available – ActiveSync and MASS STORAGE – memory card reader mode.
If you want to copy your multimedia files to device, connect the device to a computer with
USB cable and select MASS STORAGE
.