Using Your Sharp Roku Tv; Ready To Watch Broadcast Tv; Sharp Roku Tv Status Light; Standby Mode Energy Savings - Sharp ROKU LC-43LB371U User Manual

Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press UP or DOWN to change channels.
• Press RIGHT to display the channel list and then use UP or DOWN to select a channel to watch. Or press REWIND or FAST
FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Note
If
or the Jump Back button on a universal remote. For more information, see
devices
Sharp Roku TV remote control
control buttons while watching TV.

Using your Sharp Roku TV

This section provides information on using the day-to-day features of your Sharp Roku TV.

Sharp Roku TV status light

Your Sharp Roku TV has a single status light on the front panel. It goes on and off and blinks in different ways depending on
the status of your Sharp Roku TV, as shown in the following table:
TV condition
On (screen is active)
Screensaver (screen is active) Off
Off (no power)
Off (standby)
Starting up from off state
On (receiving update from
USB)
Remote control command
received
Powering down to standby
mode

Standby mode energy savings

About 10 minutes after you turn off your Sharp Roku TV, it goes into a very low power standby mode. Until that happens, if
you turn on your Sharp Roku TV again, it immediately displays the activity you selected in the Power on settings, as
described in Power on settings
longer to start up.
44
is not available on your remote control, you can use
on page 64.
on page
Status indicator
Off
Off
On
Slow pulsing blink until
startup completes
Slow pulsing blink until
update completes
Dims on/off once
Slow pulsing blink until
your Sharp Roku TV
reaches standby.
on page 53. After your Sharp Roku TV goes into the low power standby mode, it takes a bit
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
on the Roku mobile app
12 has more information on using the remote
Meaning
Screen is communicating that your Sharp
Roku TV is on.
Screen is communicating that your Sharp
Roku TV is on.
Your Sharp Roku TV is not connected
power.
Your Sharp Roku TV is connected to power
and ready to use.
Your Sharp Roku TV is doing something.
Your Sharp Roku TV is doing something.
Your Sharp Roku TV has received your
command.
Your Sharp Roku TV is doing something.
Other