Restarting Your Sharp Roku Tv; Resetting Your Sharp Roku Tv; Reset Sharp Roku Tv Settings; Factory Reset Everything - Sharp ROKU LC-43LB371U User Manual

Enabling system audio control
System audio control enables your Sharp Roku TV remote control to change the volume and mute state of an amplifier or
sound bar connected through HDMI, and to display the external device's volume and mute status in your Sharp Roku TV's
on-screen display.
Your Sharp Roku TV automatically turns off its internal speakers and sends volume and mute control signals to an external
amplifier when all of the following are true:
• System audio control is enabled on your Sharp Roku TV.
• A CEC-compatible amplifier is powered on and CEC discoverability is enabled.
• The CEC-compatible amplifier's HDMI ARC connector is connected to your Sharp Roku TV's HDMI ARC connector with a
suitable HDMI cable.
When the CEC-compatible amplifier is off, your Sharp Roku TV automatically turns on its speakers (unless you have turned
them off as described in
mute state.
System audio control is disabled by default. To enable system audio control, in the Home screen menu, navigate to Settings
> Control other devices (CEC) and highlight System audio control. Press OK to check the adjacent check box.
Enabling 1-touch play
1-touch play enables a component to control which TV input is active. For example, pressing Play on your Blu-ray player
switches your Sharp Roku TV to the Blu-ray input.
1-touch play is disabled by default. To enable 1-touch play, in the Home screen menu, navigate to Settings > Control other
devices (CEC) and highlight 1-touch play. Press OK to check the adjacent check box.
Enabling system standby
The system standby feature causes other components to power off when you power off your Sharp Roku TV. Depending on
the CEC System Standby implementation, it also might enable connected components to power off your Sharp Roku TV
when you power off the component.
System standby is disabled by default. To enable system standby, in the Home screen menu, navigate to Settings > Control
other devices (CEC) and highlight System standby. Press OK to check the adjacent check box.

Restarting your Sharp Roku TV

You can restart your Sharp Roku TV when necessary. Restarting has the same effect as unplugging your Sharp Roku TV
power and then plugging it in again.
To restart your Sharp Roku TV, navigate to Settings > System > Power and then move right to System restart and then
Restart. Press OK to confirm restart.
While your Sharp Roku TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a few
more seconds. When the restart operation is complete, you'll see the familiar Home screen.

Resetting your Sharp Roku TV

You can choose to reset only your Sharp Roku TV picture and audio settings to their original values, or perform a full factory
reset to return your Sharp Roku TV to the state it was in when you first unpacked and turned it on.

Reset Sharp Roku TV settings

To reset only your Sharp Roku TV picture and audio settings to their original values, navigate to Settings > System >
Factory Reset, and then highlight Reset TV settings. Read the information on the screen to make sure you understand
what the reset operation does.
To proceed with the reset operation, press PLAY/PAUSE three times in a row.

Factory reset everything

A full factory reset returns your Sharp Roku TV to its original, out-of-the-box state. When finished, you must repeat Guided
Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any streaming channels. You also must
repeat Antenna TV setup and input configuration.
Factory reset is the recommended choice if you want to transfer your Sharp Roku TV to another owner, and is the only
choice if you want to switch from store mode to home mode (if you inadvertently selected store mode during Guided
Setup).
To perform a factory reset, navigate to Settings > System > Factory reset, and then highlight Factory reset everything.
Read the information on the screen to make sure you understand what this reset operation does.
To proceed with the full factory reset, press PLAY/PAUSE three times in a row.
62
Turning off your Sharp Roku TV speakers
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
on page 60) and resumes local control of volume and