Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:
• HDMI (best)
• AV (composite video) (good)
• Coaxial (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your Sharp Roku TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Sharp Roku TV and to the HDMI OUT
jack on the cable or satellite box.
4 Plug your Sharp Roku TV's power cord into a power outlet, turn on your Sharp Roku TV, then turn on the cable or satellite
box.
5 On the Home screen, press
Cable or
satellite box
HDMI cable
or
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
What connection should I use?
Cable
wall jack
Back of TV
on page 14.
15