Connecting To A Pc - Panasonic HC-MDH2 Operating Instructions Manual

With a PC

Connecting to a PC

A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1
Connect this unit to the AC adaptor.
≥ Use the AC adaptor to free you from worrying about the battery running down.
2
Turn on the unit.
3
Set [USB MODE] to [DEVICE]. (
4
Connect this unit to a PC.
≥ The USB function selection screen will appear.
5
Select [PC] on the screen of this unit and press the button in the centre.
≥ This unit is automatically recognised as an external drive of the PC.
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ When performing reading/writing between a PC and an SD card, be aware that some SD card
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or
SDXC Memory Card.
≥ If you are using an SDXC Memory Card, some PC may not recognise the data. Make sure your
PC supports SDXC cards.
DEVICE
110)
l
- 98 -
(l 100)