Table of Contents
Advertisement
[Wind Noise Canceller]
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [Wind Noise Canceller] # desired setting
MENU
[Strong]:
[Normal]:
[OFF]:
≥ When [Normal] is set,
displayed on the screen.
≥ This function's default setting is [Normal].
≥ When switching to Intelligent Auto Mode, [Wind Noise Canceller] is set to [Strong], and the setting
cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
[MIC SETUP]
Recording setting of the built-in microphone can be adjusted.
: [RECORD SETUP] # [MIC SETUP] # desired setting
MENU
[STEREO MIC]:
[ZOOM MIC]:
(l
39)
When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
Cancel the setting.
will be displayed on the screen. When [Strong] is set,
Records sound from two forward directions.
Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
- 61 -
will be
Advertisement
Table of Contents
