Table of Contents
Advertisement
Advanced (Recording)
Recording functions of operation
icons
Select the operation icons to add different effects to the images to be recorded.
1
Press the cursor button to display the operation icons on the screen.
2
Select an operation icon and press the button in
the centre.
(e.g. Level Gauge)
≥ The operation icons that are displayed can be changed.
([SELECT OPERATION ICONS]:
≥ To cancel the function, select the operation icon again, and
press the button in the centre.
To display or hide Guidelines, refer to page 46.
≥ The icon is displayed when the operation icon is set.
Operation icons
Focus Assist
*1
Fade
*1
DRS
PRE-REC
Intelligent Exposure
Backlight Compensation
Guidelines
*1
Not displayed in Still Picture Recording Mode.
*2
Not displayed in Motion Picture Recording Mode.
*3
It is displayed only when a headphone is connected to the headphone output terminal. [MIC
LEVEL]
(l
62) is set to anything other than [AUTO],
and adjustment of input level of the microphone is possible.
≥ If you turn off the unit or change the mode to
≥ If you turn off the unit, the Fade function is cancelled.
≥ It is possible to set from the menu. (Except for the Level gauge, Menu, Headphone volume
adjustment.)
107)
l
*1
*2
*2
Zebra
Histogram
Marker
Level Gauge
Menu
Headphone volume adjustment/
Microphone level adjustment
is displayed as the operation icon,
, Backlight Compensation function is cancelled.
- 44 -
*3
Advertisement
Table of Contents
