Rear Panel - Sony RM-C950 Instructions For Use Manual

qg DETAIL (outline sharpness)
knob
Adjusts the sharpness of outlines in the
picture.
GAIN (gain) knob
qh
Adjusts the level of video output signals
to compensate for poor lighting
conditions. The GAIN knob only works
when the "Gain" setting of the video
camera DXC-C33/390/990/C33P/390P/
*
990P (not supplied) has been set to
"step".
* For the customers in Europe: DXC-C33P/390P/
990P are intended for medical use.
GAIN RED/BLUE (white
qj
balance adjustment) knob
Adjusts the white balance.
RED: Adjusts the red gain.
BLUE: Adjusts the blue gain.
The GAIN RED/BLUE knob only
operates when the "WHT. Bal" setting
of the DXC-C33/390/990/C33P/390P/
*
990P video camera (not supplied) has
been set to "manu".
* For the customers in Europe: DXC-C33P/390P/
990P are intended for medical use.
Note
If you switch the CAMERA/
REMOTE switch to CAMERA or
disconnect the control cable after setting
knobs qf to qj on the remote control unit,
the settings will revert back to those
previously set in the camera.
8
Locations and Functions of Parts

Rear Panel

CAMERA
There are two screw holes in the bottom of the
unit. These allow the unit to be attached to a
rack. For details on usage, contact the store
where you purchased the unit, or your
authorized Sony dealer.
CAMERA (camera) connector
1
(mini DIN, 8-pin)
Connects to the
the video camera DXC-C33/390/990/
*
C33P/390P/990P
the supplied connector cable.
* For the customers in Europe: DXC-C33P/390P/
990P are intended for medical use.
remote connector on
(not supplied) using