Rear Panel - Sony rm-c950 Instructions For Use Manual

Locations and Functions of Parts
!£ LOCK (lock) button and LOCK (lock) indicator
Locks the settings of knobs !¢ to !¶.
The LOCK indicator lights up when the settings have been
locked.
!¢ MASTER PEDESTAL (pedestal level) knob
Adjusts the output signal pedestal level for the R, G, B
channels simultaneously.
!∞ DETAIL (outline sharpness) knob
Adjusts the sharpness of outlines in the picture.
!§
GAIN (gain) knob
Adjusts the level of video output signals to compensate for
poor lighting conditions. The GAIN knob only works when
the "Gain" setting of the video camera DXC-950/950P/
970MD (not supplied) has been set to "step". The gain may
be set from 0 dB to 18 dB.
!¶
GAIN RED/BLUE (white balance adjustment)
knob
Adjusts the white balance.
RED: Adjusts the red gain.
BLUE: Adjusts the blue gain.
The GAIN RED/BLUE knob only operates when the
"WHT. Bal" setting of the DXC-950/950P/970MD video
camera (not supplied) has been set to "manu".
22
Note
If you switch the CAMERA/
CAMERA or disconnect the control cable after setting
knobs !¢ to !¶ on the remote control unit, the settings will
revert back to those previously set in the camera.

Rear Panel

CAMERA
1
CAMERA connector
There are two screw holes in the bottom of the unit. These
allow the unit to be attached to a rack. For details on usage,
contact the store where you purchased the unit, or your
authorized Sony dealer.
1
CAMERA (camera) connector (mini DIN, 8-pin)
Connects to the remote connector on the video camera
DXC-950/950P/970MD (not supplied) using the supplied
connector cable.
REMOTE switch to