Inside The Box; Maintenance - Vortech MP10 Setup Manual

Inside the Box

POWER SUPPLY
MOUNTING TABS (X4) VELCRO STRIPS (X2)
DRIVER DRY SIDE
2
POWER CORD FOAM GUARD
ZIP TIES (X4)
WET SIDE RUBBER SPACER
Your VorTech Propeller Pump is designed to
operate optimally with little attention after initial
setup; however, due to the harsh conditions of a
saltwater aquarium and resulting buildup of algae
and other organic matter, it is advisable to clean your
wet side to ensure the longevity of your purchase.
EcoTech recommends doing a wet side cleaning
every 6 to 8 weeks or as necessary.
This can be accomplished by disassembling the
pump's wet side and gently brushing with a soft
brush under running water. If there is calcium
buildup, it may be necessary to soak these
parts in a mild acid solution such as vinegar.
Do not use strong acids, because these may
damage the components.
After cleaning, reassemble the wet side.

Maintenance

WET SIDE
DISASSEMBLY
WATCH THE VIDEO:
ecote.ch/mp10qddisassemble
3