Viscount CM-100 User Manual page 39

VISCOUNT
CM-100
Once the settings have been made, press EXIT to return to the MIDI menu: the settings will automatically
be saved, and will be retained even if the instrument is switched off. From the MIDI menu, you may return
to the main page by pressing EXIT twice.
3.4. Setting the MIDI Reception Channel in SPLIT Mode
3.4. Setting the MIDI Reception Channel in SPLIT Mode
Press the WHOLE/SPLIT key to enable the multi-channel mode: when it is enabled, the LED of the key
is constantly on.
The procedure for setting the reception channels is similar to that described in point 3.3: from the main
page, press the SETUP key
[TREMULANT] [REVERB] [MIDI]
[FINISH] [EXP. PEDAL]
then use the cursor keys to select the MIDI menu (the menu option is selected when it is flashing) and
press ENTER
[WHOLE MODE]
[BULK DUMP] [CAPTURE VOICE ID]
Using the cursor keys, select the SPLIT MODE option and press ENTER
CtBourd32> 1
HohlFlot8> 1
The video page contains the names of all the stops, in accordance with the instrument's current setup,
followed by the value of the midi channel associated to each of them.
With the usual procedure, use the CURSOR keys to select the value to be changed, and then modify it
using the encoder.
Note that:
When a stop is selected for modification, both its value on the display and the light in the rocker
Tab switch on the panel flash
A stop can be selected for modification by pressing its key directly on the panel.
Illumination of the LEDs of the [ ] and [ ] buttons indicates the availability of a video page before
or after the one currently displayed, respectively. Press the relative button to select it.
Once the settings have been made, simply press EXIT to return to the MIDI menu: the settings made will
automatically be enabled and saved. Then press EXIT to return to the SETUP video page, which can be
exited by pressing the same key.
3.5 Additional notes
As you can see from the setting video pages examined in this section, the CM100 offers additional MIDI
communication setting options, apart from setting of the reception channel.
You will find descriptions of all these additional functions, including a handy procedure for acquiring
remote commands for switching stops on and off, in the advanced manual.
LCD contrast: 6
[SPLIT MODE]
Gedackt16> 1
Octave4A > 1
Page 14
Pipe Organ Module
[OUTS CTRL]
[FILTERS]
Schwebng8> 1
SptzFlot4> 2