Viscount CM-100 User Manual page 36

VISCOUNT
CM-100
2.2 Display Messages
2.2 Display Messages
INFO MESSAGE: LINE OUTs NOT CONNECTED
The CM-100 has detected that there are no loudspeaker boxes connected to the outputs: you can only
listen to the instrument using the headphones. Press EXIT to return to the main page
WARNING: LINE OUTs HAVE TO BE CONNECTED
CONTIGUOSLY (1 to 6)
The system has detected that the loudspeakers have not been connected correctly, so some outputs
might not work or might malfunction.Check the connections and make sure that they have been made
as described in point 1.4. Press EXIT to exit
2.3 Listening to the Demo songs
2.3 Listening to the Demo songs
In the CM-100 DEMO mode you can play back a number of short pieces of music, which the instrument
plays itself to demonstrate its timbre qualities (demo songs).
To access the DEMO mode, locate on the main page and press the VOICE and SETUP keys
simultaneously. The following video page will appear on the instrument's display:
Select DEMO song with VOICE MEMORY Keys:
There is one demo track associated to each of the VOICE MEMORY keys: simply press the key of the
demo you wish to hear and it will start to play.
The display will indicate that the selection has been made by showing the word PLAYING followed by
the name of the song and the progress bar.
Select DEMO song with VOICE MEMORY Keys:
PLAYING: Pescetti_Presto
At the end of the piece, the instrument returns to the demo song selection video page.
You can stop the demo at any moment by pressing the EXIT key or pressing the demo song selection
key again.
N.B. The instrument automatically sets the timbre suitable for performance of the demo
song selected: however, this setup can be changed while the song is playing using the
stops on the front panel.
To exit the DEMO mode, press the VOICE and SETUP keys simultaneously, or the EXIT button: in both
cases the instrument will return to the main video page
press EXIT
press EXIT
[²²²²²/
Page 11
Pipe Organ Module
]