Stop & Start System - Ferrari 458 Spider Owner's Manual

Hide thumbs Also See for 458 Spider:
Table of Contents

Advertisement

Stop&Start system (optional)
Vehicles with the optional HELE (High Emotion Low Emissions)
system have a Stop&Start system that automatically stops the engine
when the vehicle is stationary and restarts it, again automatically,
when the driver wants to set off again.
The aim of the Stop&Start function is to increase vehicle efficiency
by reducing CO
emissions especially when driving around town.
2
Automatic stopping and restarting of the engine is controlled by
sensors and control strategies which, while reducing the impact
on vehicle flexibility and comfort to a minimum, guarantee full
operating of the safety systems and all the on-board systems even
when the engine is switched off, without affecting climate comfort.
Warning
Never leave the vehicle without turning the ignition key to
position 0.
Always remember to remove the key from the ignition when you
get out of the vehicle!
Never leave children unattended in the vehicle.
Warning
Make sure that the engine is switched off with the ignition key
in position 0 before refuelling.
Warning
Always make sure that the Stop&Start system has been
deactivated before carrying out any repair and/or maintenance
work as indicated on the special labels on the engine
compartment lid and underneath the vehicle.
Failure to comply with the above may pose a risk of serious
injury to people working on the vehicle.
Warning
The driver is personally responsible for leaving the key in the
ignition in position II when getting out of the vehicle: the driver
must always turn the ignition key to position 0 before getting
out of the vehicle.
Warning
Leaving the vehicle with the ignition key in position II puts
those who are in the vicinity of the vehicle at serious risk if the
engine starts unexpectedly.
Warning
Always turn the ignition key to position 0 before changing the
tyres.
About your Vehicle
4
167

Advertisement

Table of Contents
loading

Table of Contents