Advertisement
4-C
REMEMBER, the handlebar stem may be raised or lowered for comfort, but it should never be raised above the
"Minimum insertion line" marked on the stem.
5. INSTALL PEDALS
Required tool – 15mm open-end wrench, or adjustable wrench.
CAUTION: The right pedal has right-hand threads and must be installed in the right crankarm, tightening in a
clockwise direction (5-B). The left pedal has left-hand threads and must be installed in the left crankarm,
tightening in a counter-clockwise direction (5-C). To avoid cross-threading, carefully start and tighten pedals by
hand. Then tighten securely with a 15mm wrench.
5-A
Pedals are marked "L" and
"R" on their spindles.
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 11/19/13
specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
The handlebar may have been rotated for shipping.
To adjust, use a 6mm hex wrench to loosen the
handlebar clamp bolt on the stem (4-C). Rotate to
desired position and tighten the bolt. The grips should
be parallel to the ground. The bolt should be tightened
Handlebar
enough that there is no movement when firmly pushing
clamp bolt
against the handlebar.
5-B
Insert right pedal into right
crankarm and turn
clockwise.
5-C
Insert left pedal into left
crankarm and turn counter-
clockwise.
pg.5
Advertisement
