Advertisement
Insert the seat post into the bike's seat tube. The saddle is adjustable forward and back along the saddle rails and can be
angled up or down. The best starting position is with the saddle horizontal and in the middle of the seat rails. With the
bike on the ground find this position and tighten the seat post clamp bolt.
Open the quick-release
lever of the seat tube clamp
and slide in the seat post
4. INSTALL PEDALS.
Required tool – 15mm open-end wrench, or adjustable wrench.
CAUTION: The right pedal has right-hand threads and must be installed in the right crankarm, tightening in
a clockwise direction. The left pedal has left-hand threads and must be installed in the left crankarm, tightening
in a counter-clockwise direction. To avoid cross-threading, carefully start and tighten pedals by hand. Then
tighten securely with a 15mm wrench.
Pedals are marked "L" and
"R" on their spindles.
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13
specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
Seat mounted
correctly
Place right pedal into right
crankarm and turn
clockwise.
Saddle set
horizontal
Insert left pedal into left
crankarm and turn counter-
clockwise.
pg.5
Advertisement
