Advertisement
Quick Links
Final Assembly Instructions – Bikes with Threaded Headsets
Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final
assembly. Prior to shipping, our expert cycling technicians completely assembled and tuned your bicycle to ensure that
all components are functioning properly. However, for shipping purposes we have to partially disassemble your bicycle.
Although this bicycle has been factory pre-assembled, some loosening may have occurred during shipping and handling.
WARNING: BEFORE ATTEMPTING TO RIDE THIS BICYCLE, read the enclosed Owner's Manual thoroughly. The
Owner's Manual includes important information on customizing your bike for an optimal fit.
Tools required for final assembly:
Cutting-type pliers – for removal of packaging materials, including "zip-ties"
5mm & 6mm Allen wrenches – for tightening stem bolt
15mm wrench or adjustable wrench – for tightening pedals
Phillips head screwdriver – for tightening the front reflector
BEFORE GETTING STARTED:
PLEASE REMOVE BICYCLE FROM BOX AND REMOVE PACKAGING MATERIAL. Recommended tool –
diagonal cutting pliers, wire cutter, heavy duty shears, or multi-tool wire cutter.
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13
specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
FYI - Your bicycle may appear different
from those in photos.
pg.1
Advertisement
Related Manuals for L.L.Bean Bicycle
Summary of Contents for L.L.Bean Bicycle
- Page 1 FYI - Your bicycle may appear different from those in photos. QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
- Page 2 QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m.
- Page 3 If resistance is not firm, open the lever and tighten the adjusting nut in a clockwise direction. 4. Continue to pivot the lever all the way to the closed position so that the curved part faces the bicycle.
- Page 4 QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.4...
-
Page 5: Install Pedals
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.5... - Page 6 Generally, you do not want to raise your saddle higher than determined by this method. If you have to rock your hips to reach the bottom of the pedal stroke, then your saddle is too high. However, if while riding your bicycle, this position doesn’t feel comfortable to you, adjust as necessary.
- Page 7 The stem can be moved up and down. QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.7...
- Page 8 QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 3/1/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.8...